How to Use Wing It Paint for a Bold Accent Wall
By Clare | Published: 2026-10-29
Category: How-to Guides
Learn how to paint a bold accent wall using Clare's Wing It paint. This guide covers surface prep, cutting in, rolling, and common mistakes to avoid.
Quick answer
Use Clare's Wing It paint on a single wall to create a bold accent wall. Focus on proper surface prep, cutting in, and even rolling to achieve a smooth, professional finish.
Why Wing It works for a bold accent wall
Wing It is a pale, sophisticated barely-there pink that adds a subtle yet striking pop of color. Its light, airy tone makes it ideal for an accent wall that stands out without overwhelming the room. The finish options (matte, eggshell, or semi-gloss) let you control the sheen and durability, so you can match the look to your space's traffic and lighting.
Trade-offs to consider
Because Wing It is a light pink, it works best on walls that get natural light. In darker rooms, the color may appear more muted. Also, light colors require thorough coverage—plan for two to three coats to avoid patchiness. If your accent wall has texture or imperfections, they may be more visible with a matte finish, so consider a higher sheen if your wall isn't perfectly smooth.
How to paint your accent wall with Wing It
- Prepare the wall: Clean the wall with a mild detergent to remove dust and grease. Fill any holes or cracks with spackle and sand smooth. Tape off edges with painter's tape and lay drop cloths on the floor. Check that the wall is completely dry before painting to avoid adhesion issues.
- Prime if needed: If your wall is dark or has stains, apply a high-quality primer. For most white or light walls, you can skip priming, but it ensures even color and better coverage for Wing It's light pink. Use a tinted primer close to Wing It's pink to reduce the number of coats needed.
- Cut in the edges: Use a 2-inch angled brush to paint the corners, edges, and around trim. Work in small sections and maintain a wet edge to avoid visible brush strokes. Don't let the cut-in line dry before rolling—this prevents lap marks and ensures a seamless finish.
- Roll the wall: Use a 3/8-inch nap roller for smooth walls or a 1/2-inch nap for textured walls. Load the roller evenly and apply in a W pattern, then fill in without lifting. Work from top to bottom, overlapping each pass slightly. Roll in one direction to avoid roller marks. If you see drips, smooth them immediately.
- Apply additional coats: Let the first coat dry completely (about 2–4 hours). Lightly sand any rough spots with fine-grit sandpaper, then apply a second coat. For best coverage, a third coat may be needed on porous or dark walls. Check coverage in different lighting before deciding if a third coat is necessary.
- Remove tape and clean up: Peel off painter's tape while the paint is still slightly tacky to avoid peeling the paint. Clean brushes and rollers with soapy water if using latex paint. Use a utility knife to score the tape edge if the paint has fully dried to prevent tearing.
Product facts
- Wing It: A pale, sophisticated barely there pink, inspired by our favorite all-ladies social club that made pink our new favorite neutral. This means Wing It adds a soft, modern accent that pairs well with neutrals and bolder hues, giving you a versatile accent wall color.
Wing It
